skip to Main Content
Made in the USA | 1-888-SEMIGROUP  | | Contact Us

SGM-02A3YB11 | Yaskawa Servo Motor

SGM-02A3YB11 | Yaskawa Servo Motor



  • Visual inspection of Servo Motor.

  • Rotate the shaft forward and reverse.

  • Meg the motor.

  • Use Mitchell Electronic test equipment to check the alignment of the feedback, perform a KE test and check the function of feedback including resolver angles, encoder and tach voltages.

  • If encoder is damaged it is then replaced with a new encoder.

  • Disassemble and clean the Servo Motor.

  • Perform the surge and hipot test.

  • Reassemble Servo Motor.

  • Replace bearings and seals.

  • Align feedback

  • Perform final bench test on our test equipment.