skip to Main Content
Made in the USA | 1-888-SEMIGROUP  |  parts@semigroup.com |

EP0810AF8-05 | NSK Controller

EP0810AF8-05 | NSK Controller

Features


  • Disassemble the Controller.

  • Full visual inspection is done.

  • Replace any defective parts.

  • Change all electrolytic capacitors.

  • Repair solder connections and reflow solder as required.

  • Mate power supply to logic board and test basic fault circuits.

  • Bench test drive the drive modules and check output phasing.

  • Reassemble drive and bench test.

  • Check fault circuits and communications.

  • Tune controller to motor and complete final motor test.

  • Reset internal switches to customer settings.